Aviation Maintenance Training Center (AMTC) Practice Exam

These questions are part of the practice quiz. Start practicing

• Requests for exceptions to policy for awards are forwarded through the chain of command to which office?
• The distance combustible materials must be kept from a heat source is closest to which value?
• How many steps are there in the Classical RCM?
• What is the RCM process guide?
• What should be stationed near the aircraft during engine starting?
• The breathing oxygen cylinder features include color and band width; the band is how wide?
• What is the resources requirement percentage that should be met?
• The fire guard shall stand by until all engines are operating and danger of fire?
• What depth is considered severe corrosion?
• To fill an E-8 position, a member must have served as an E-7 for how many years?
• If an aircraft requires a test flight as the final maintenance action, the test flight items remain in what status?
• Which particle characteristic is identified as the greatest threat to the respiratory system?
• Which role is responsible for ventilation adequacy in enclosed spaces?
• Who shall brief the pilot in command of flight verification checks and test flights?
• Which tire feature directs water away from engine intakes?
• Which gas is used to purge lines during maintenance?
• Which information can be found at the SAPRR program site?
• Depth of severe corrosion?
• Which of the following is a listed step in Classical RCM?
• Wear on the sides of a tire indicates which condition?
• On the changed page, where is the change number printed?
• Which action corresponds to monitoring changes in the RM process?
• Combustible materials shall not be stored within how many feet of a stove, furnace, or boiler?
• Pregnant personnel shall not work with which of the following materials?
• What are members of the substance abuse prevention team called?
• Which statement best describes ACMS?
• Which statement best describes sunglasses frame color policy?
• What is the max milliamperes the interlock circuit shall draw from the aircraft's 28 VDC circuit?
• How do you calculate NMCT? (Not mission capable total)
• In meeting facilitation, which step establishes ground rules?
• When is desiccant replaced for an engine being stored?
• What is the purpose of the ALCGENL message released prior to the SWE?
• If you are asked to report a workplace hazard, which form would you fill out?
• Which PD template code corresponds to a General Negative CG-3307?
• Priority 5 requisitions will be filled if there are more than how many parts on ALC's shelf?
• The E-Resume must be submitted within 30 days of being projected for advancement to E-7.
• During cockpit engine starts, how many crew members must be present?
• The aircraft service cable shall contain how many conductors?
• Which template would you use to prepare a General Negative CG-3307?
• The process for changes and modifications to the Aircraft is approved through which process?
• Which statement describes internal use of Thru lines on a memo?
• The 781J web report is accessed via which path? (alternate phrasing)
• Which crew arrangement is the minimum for ferry flights?
• When wearing the Tropical Blue Long Sleeve uniform, __________ will be worn over the wearer's right pocket.
• What is an authorized color for sunglasses frames?
• Who has final authority regarding funds to various departments?
• Who performs trial installations of parts?
• Consensus discussions are part of what step in meeting facilitation?
• Which watch color is prohibited?
• What do you do to a cable that has light corrosion on the inner strands?
• Elimination of which element is essential for preventing fires and explosions?
• Which statement describes the effect of ice inhibitor on JP-5?
• What is the Safety and Environmental Health Manual Number?
• Which monetary threshold triggers priority consideration for component value?
• If a cable shows light corrosion on the inner strands, what is the recommended action?
• How should the individual citation for the Meritorious Service Medal and below (excluding LOC) be prepared?
• Pneumatic pressure type detectors are composed of which system?
• What shall be stenciled in white on DOD owned cylinders?
• What gas should be used for purging gases from equipment or piping?
• How many people shall be in the cockpit during C-130 engine starts?
• What is the target percentage for aircraft availability?
• During a meeting who should abstain from content discussion?
• What type of equipment will be used in extremely high concentrations of toxic gases and vapors for personnel entering a fuel tank?
• Which condition triggers a weight and balance check?
• How many stages are there in conflict?
• What is the most common cause of mishaps according to analysis of mishap data?
• What is the max amount of rings that can be worn per hand?
• Which two references provide the criteria for lighting minimums?
• Who assumes custody of an aircraft during pickup or delivery when scheduled for programmed depot maintenance?
• What type of oxygen will be used?
• When wearing the Tropical Blue Short Sleeve (TBSS) uniform, men are required to wear _____.
• In risk management controls, which option is the first line of defense?
• The waste management manual is identified by which instruction code?
• Which NF code page provides specific information for flammable liquids and gases?
• What shall be used near open fuel cells or taken into fuel cells?
• The USCG policy regarding noise hazards and conservation is located in which manual?
• In the ranking of military awards, which has the highest precedence?
• Why analysis in the Risk Management Process is used during which action to identify underlying causes?
• If a cylinder has leaking fittings or valves, what action should be taken?
• What is the first choice in the standard order of precedence for Risk Management Controls?
• Bench cans are used for which purpose in the work area related to small parts?
• At what angle is the service stripe placed on the SDB jacket?
• Which statement best defines a flight verification in maintenance?
• What on a tire is designed to deflect water away from engine intakes?
• For Ferry flights the minimum required pilot assignment consists of?
• Which mobile app can be used to locate the unit Ombudsman?
• What document is identified by the code 13020?
• The oxygen used must conform to which standard?
• Which item is worn on the wearer's right pocket when using the Tropical Blue Long Sleeve uniform?
• What does a R with a number indicate on a tire's sidewall?
• What form shall be used for submitting recommended changes to flight manuals?
• The Tri swap memorandum includes discrepancies encountered during the first how many days?
• Who is responsible for maintaining the completed IDP at unit level?
• What is the primary function of ACMS?
• How are changes or modifications to the Aircraft reviewed?
• Which element of successful leadership is associated with the leadership competency 'taking care of people'?
• Which document provides the guidelines for entering fuel tanks?
• Individual flight hours and crew mission hours are cumulative unless?
• What is the third stage of conflict?
• Which option is NOT a step in the Classical RCM?
• PQDR stands for which of the following?
• Classification of a seep?
• Which crew uses the LPU-27/PE life vest?
• 13020 refers to which maintenance manual?
• NMCT stands for which of the following?
• Wing anti-ice valves close after how many minutes if the ice detector does not detect ice?
• The target availability of 71% equates to NMCT of what percentage?
• What is the purpose of a backup ring?
• How long shall the oxygen system stabilize before use?
• What is a responsibility of a timekeeper in a meeting?
• Aircraft valve cores are identified by?
• Which crew uses the LPU-27/PE life vest?
• In the sequence of conflict stages, which stage corresponds to escalation?
• What is the national suicide prevention lifeline phone number?
• Which status best describes the final action scenario for a test flight?
• Which item is a tool to help ensure compliance with 29 C.F.R. 1960 and keep the workplace free from serious recognized hazards?
• What is the purpose of form CG-4903?
• Which of the following tools should be used in areas near open fuel cells to reduce ignition risk?
• What color is breathing oxygen cylinder?
• Composite structure repair safety requirements are contained in which document format?
• What shall be used to evaluate the amount of lighting in working areas?
• What is the NMCS Target?
• Which item is NOT listed as a meeting evaluation method?
• Which of the following is one of the seven steps in the Classical RCM?
• Discussions of an individual's personal finances with the PFMP are ______.
• Which step number corresponds to the consensus discussions in standard meeting facilitation?
• PKP extinguisher placement distance from LOX servicing area?
• When are deadlines for PDE verifications provided?
• Where are copies of all form CG-3307 sent for electronic imaging into the IPDR?
• Which statement best describes the particle hazard described as the greatest threat?
• Priority should be given to critical components and components valued in excess of?
• What contact would you provide to members asking about work-life resources available for spouses?
• A planning goal of NMCS is 5%. This corresponds to what minimum parts availability percentage?
• A test flight for flight control maintenance may be waived at the discretion of?
• What are the 3 types of hydraulic contamination?
• In conflict management, which stage involves overt communications to convince the other party of a better solution?
• Which Work-Life Program site offers a link to download Parental Leave Policy Flyers?
• 400 Hz external power shall include which safety feature?
• Which award has the highest precedence?
• What color is the service strip on the SDB jacket for an E-4?
• In a formal meeting, what is the primary duty of the timekeeper?
• In the first step of the Risk Management Process Cycle, 'Why' analysis is used in which action?
• At what temperature does liquid oxygen boil?
• Which document can you provide to members requesting information about self-referrals and seeking treatment for substance abuse?
• Which extinguishing agents may be used by a fire guard near an aircraft during engine start?
• The wing anti-ice valve shutoff limit is not more than how many turns during servicing?
• What type of flashlight will be used when working in or inspecting an open tank?
• What are ground checks?
• A standard rail shall consist of top rail, intermediate rail, and posts, and shall have a vertical height of?
• Who handles aviation mishaps?
• Where is the criteria for lighting minimums found?
• Introduction of ice inhibitor will lower the flash point of JP-5 by?
• After receipt of an aircraft, deficiency reports resulting from HC-130 PDM shall be prepared in message format not later than?
• What is used to comment on a memorandum in routing?
• The final authority regarding funds to various departments is held by whom?
• What training code direct PDC's to ensure members can complete EPQ or RPQ correctly without assistance, prompting, or the use of any job or memory aid?
• Which statement describes the components of a standard rail?
• What manual establishes guidelines lines for entering fuel tanks?
• The purchase of Halon fire extinguishers for flight line, hanger, and shop use is?
• What respirators shall be used for mixing paint and general painting operations?
• Which statement is true regarding ventilation adequacy assessment?
• Which statement best describes the purpose of the IDP process for supervisors?
• What tag is attached to serviceable equipment?
• Which office serves as the focal point for technical and engineering support for systems and equipment in the operational inventory?
• How many types of meeting evaluation processes are described during the Evaluate the meeting phase?
• For PDM TCTOs requiring less than 4 labor hours, issuance must occur within how many days?
• Who can approve any Cannibalization of parts?
• NMCT is the sum of which components?
• Paint shop safety compliance is provided by which regulation?
• What color is stenciling on DOD owned cylinders?
• What is the first step of resolving conflict among peers?
• If a member refuses to sign a CG-3307, what must be entered in the signature block?
• Tech manual changes are identified by referring to?
• Which statement best describes the root cause of most mishaps according to the data?
• What shall not be created where they are ingested into heating and vent systems?
• Which numerical label corresponds to the step 'Establish ground rules' in the meeting facilitation sequence?
• Which term is used to describe approving a memorandum in routing?
• What report is used to document unusual work required for aircraft scheduled for PDM?
• What color tag indicates serviceable equipment?
• Who can offer unit-wide tobacco cessation education and training upon request?
• Which tag denotes serviceable equipment?
• What does SAPS stand for?
• What is a flight verification?
• Post PDM report memorandum shall be submitted to the unit no later than how many calendar days after receipt of the aircraft?
• During LOX servicing, non-involved personnel should maintain a distance of at least what distance?
• Which of the following is the correct option for the respirator used during paint mixing and general painting operations?
• Where can you print the two-page PFMP fact sheet for financial counseling resources?
• Replacement flight line fire extinguishers shall be?
• TEMPEST testing is required for which scenario?
• Where is IDP counseling documented?
• What shall not be removed from removing paint or grease coating from your skin?
• A seep falls under Class B when its size is between which inches?
• What is the minimum number of people for LOX servicing?
• Which resource would you reference to obtain information about self-referrals and treatment for substance abuse?
• Which prefix represents the top-level module to access the 781J web report?
• The purchase of halon fire extinguishers for flight line, hanger, or shop use is?
• Which description correctly states how the IDP is finalized and stored?
• Which code corresponds to a General Negative CG-3307 template?
• Adequacy of ventilation in enclosed rooms shall be determined by who?
• Pressure in oxygen cylinders shall not fall below what PSI?
• Which statement about conflict stages is true?
• What document code identifies the RCM process guide referenced in maintenance procedures?
• What direction do you blend a compressor blade?
• A member projected for advancement to E-7 must submit an E-Resume within how many days?
• What is the designation of the general advanced composite repair process manual?
• What will be used where small parts are customarily cleaned with flammable liquids?
• Which page of the National Fire Code provides specific information for flammable liquids and gases?
• Which of the following is an action in step 4 of the Risk Management Process?
• In rare situations where fuel samples cannot be taken who can authorize a waiver?
• How long after advancement to E-7 would you expect to transfer?
• What type of fire extinguisher shall be used when servicing LOX?
• How far shall people not involved in LOX servicing be from the area?
• Which of the following is a risk assessment pitfall?
• During a meeting who is required to stay out of content discussion?
• Priority 5 requisitions will be filled if there are more than how many parts on ALC's shelf?
• When using Thru lines on a memo, which statement correctly describes external use?
• What is a supervisor's responsibility in relation to the IDP?
• A written report of salvage and recovery challenges should be submitted to CG-41 via chain of command within how many days?
• Which app is used to locate the unit Ombudsman for Coast Guard personnel?
• What is a Test flight?
• Develop controls is the first action in which step of the Risk Management process?
• Who is an individual assigned to the QA department who is responsible for determining if a fuel system is safe from hazards?
• After receipt of materials from vendors, the prompt payment act requires that invoices get paid within?
• Which of the following is NOT a hydraulic contamination type?
• What is the RCM process guide?
• Aviation units receive funds from which source?
• Who is responsible for briefing the pilot in command about flight verifications and test flights?
• What is the Thomas-Kilmann definition of conflict?
• Servicing control valve shall not be opened more than how many turns?
• How many people are required to tow a MH-60 or MH-65?
• How many enlisted members are there in an RCM group?
• In confidentiality terms, how are conversations about personal finances with the PFMP classified?
• In step 5 of the RM process, ensuring changes requiring further RM are identified is part of which action?
• Which form is used to report workplace hazards?
• How often do you check the humidity of a canned engine?
• The 781J web report can be accessed through which path?
• The 400 Hz external power interlock safety requirement is provided by which component?
• What is most effective in putting out solvent fires?
• What will be used for disposal of oily waste?
• Which step in meeting facilitation involves describing how the meeting will be run, and how decisions will be made?
• What type of respirator shall be used when spraying aircraft polyurethane paint systems?
• The waste management manual is identified by which instruction code?
• Where is the change number printed on the changed page?
• Under which condition should an aircraft weight and balance be checked?
• Which container type is used for the disposal of oily waste in the work area?
• Which item is NOT one of the actions in step 4 of the Risk Management Process?
• Flight personnel shall not perform flight duties for 12 hours after exposure to LPC in excess of how many feet?
• Which office is the focal point for technical and engineering support for the operational inventory?
• Proper painting of ceilings and walls should be used to give max lighting without what?